Features:
Room regulator and switch in one stylish housing? It is possible! Replace the traditional wall switches with glass and stylish ones and connect them to the room controller by selecting WZR-02 in order to control not only the lighting, but also any device, as well as have an overview and control of the temperature in the room.
All this connected and managed in one Sinum smart home system 2-gang touch switch equipped with 2 relays and 2 sensor fields, allows you to operate the roller shutter up and down connected to the switch directly from the place of installation. After adding and programming the WS switch in the EH-01 central device, it allows for remote control as well as adding scenes and actions. The switch has a built-in LED indicating the device status (on / off). The user may adjust the backlit colour and brightness using the SINUM application. Communication with the EH-01 central device is wireless.
Expand your system with an intelligent wireless room regulator! The regulator is equipped with a large backlit display with touch buttons. In addition, it has an air humidity sensor, and allows you to control the floor temperature thanks to the possibility of connecting a wired NTC floor sensor (not included). The regulator sends the current temperature to the EH-01 central device, which compares the set temperature with the current temperature and then controls the operation of the heating device, radiator or thermostatic actuators in order to turn the heating on or off. Is it too cold or too hot? Thanks to the heating / cooling mode, you can always have the perfect temperature at any time of the year!
After adding and programming the regulator in the EH-01 central device, it is allows for remote control the temperature, set schedules, and perform actions and scenes depending on the room temperature. Check how easy it is and finally feel comfortable in your home!
Specification | Value |
Height | 84.7 mm |
Width | 164 mm |
Depth | 37.2 mm |
Power Supply | 230 V AC |
Power Consumption | 1 W |
Operating Temperature | 5°C - 50°C |
Number of Relay Outputs | 2 |
Max Relay Load | 0.5 A |
Display Type | LCD |
Momentary Backlighting of Display | YES |
Touch Buttons | YES |
Built-in Air Temperature Sensor | YES |
Built-in Air Humidity Sensor | YES |
Hysteresis Range | 0.2 - 8°C |
Temperature Control Accuracy | 0.1°C increments |
Additional Options | Floor temperature control (when using an NTC floor sensor) |