WSR-03m

Features:

• Room temperature measurement and regulation
• Air humidity measurement
• Option to measure and regulate floor temperature (when using an NTC floor sensor - not included)
• wired communication
• Large LCD display with temporary backlighting
• Heating/cooling mode
• Touch buttons
• Lighting control on/off
• 2 relays for controlling two lighting circuits
• 1 button with programmable capabilities to control any device or 3 lighting circuits
• Option to change backlight color and display mode
• Option to adjust brightness level from 0-100%
• Automatic backlight brightness adjustment based on room lighting conditions

Available version with a display on both the right and left sides

A thermostat and a switch in one stylish housing? It's possible! Replace traditional wall switches and combine them with a temperature controller by choosing the WSR-03m. You can control not only the lighting but also any device and have a view of and influence on the room's temperature, all connected and managed within the Sinum smart home system.

The triple touch switch is equipped with 2 relays and 3 sensor fields, allowing you to control 3 lighting circuits (the middle button can be assigned to control any device) directly from the installation location.

After adding and programming the switch in the Sinum central unit, you can remotely control it, add scenes, and perform actions using the switch.

The switch has a built-in LED indicator that shows the device's status (on/off). You can also change the backlight color and brightness from the Sinum application. It communicates wirelessly with the Sinum central unit.

Expand your system with an intelligent wireless temperature controller! The controller features a large illuminated display with touch buttons. It also includes an air humidity sensor and allows you to control floor temperature by connecting an optional wired NTC floor sensor (not included).

The controller sends the current temperature to the Sinum central unit, which compares the set temperature with the current temperature and then controls the operation of heating equipment, radiator heads, or thermostat valves to turn the heating on or off. Whether it's too cold or too hot, with the heating/cooling mode, you can always have the ideal temperature, no matter the season!

After adding and programming the controller in the Sinum central unit, you can remotely control the temperature, set schedules, and perform actions and scenes based on the room's temperature. Check how simple it is and finally enjoy comfort in your home!