WSR-01

Available version with the display on the right and left sides

Room regulator and switch in one stylish housing? It's possible! Replace traditional wall switches and connect them with a temperature controller by choosing the WSR-01, allowing you to control not only lighting but also any device, and additionally have a view and influence on the room temperature. All of this connected and managed in one Sinum smart home system.

A single touch switch equipped with 1 relay and 1 touch-sensitive area allows you to control the lighting connected directly to the switch's installation location.

After adding and programming the switch in the Sinum control center, you have the option of remote control, adding scenes, and actions using the switch.

The switch has a built-in LED indicator that shows the device's status (on/off). You can change the backlight color and brightness from the Sinum app. Communication with the Sinum central unit is wireless.

Expand your system with an intelligent wireless temperature controller! The controller is equipped with a large backlit display with touch buttons. Additionally, it has an air humidity sensor and allows for floor temperature control by connecting a wired NTC floor sensor (not included in the set).

The controller sends the current temperature to the Sinum central unit, which compares the set temperature with the current temperature and then controls the operation of the heating device, radiator heads, or thermostatic devices to turn the heating on or off. Is it too cold or too hot? Thanks to the heating/cooling mode, you can always have the perfect temperature, no matter the season!

After adding and programming the controller in the Sinum central unit, you can remotely control the temperature, set schedules, and perform actions and scenes based on the room temperature. Check how simple it is and finally feel the comfort in your home!