Regulators and temperature sensors-wired, battery

EU-297 v3

WIRED TWO-STATE ROOM REGULATOR (flush mounted)
  • Product description


Wired Two-State Room Regulator

(flush mounted)

Functions performed by the controller:

  • room temperature control +/- with an accuracy of 0.1 ° C
  • hysteresis in the range from 0.2 to 8 °C
  • manual program
  • day / night program
  • temporary illumination of the display
  • additional control based on floor temperature (if wired NTC floor sensor is used)
  • heating / cooling function
  • non-voltage No/Com/Nc relay (max. 1A/230V/AC)
  • wired communication

Controller equipment:

  • built-in room sensor
  • 2 x AAA 1.5V batteries
  • flush mountable in a 60mm box  

grzanie-chlodzenie_ico_web Heating / Cooling mode:

This function allows you to control devices used for heating, such as cooling devices or air conditioners. In order to configure the operation, select the function in the menu that you want the regulator to perform (heating or cooling).

 

czujnik-temp-pod_ico_webFLOOR TEMPERATURE sensor:

When using an additional floor temperature sensor, the room regulator will control the room temperature taking into account the floor temperature (set the minimum and maximum floor temperature). Among other things, we can prevent the floor from cooling down in well-sunny rooms.