Two-state room regulators flush mounted - EU-297 v2 - TECH Controllers

×

Home ControllersRoom regulatorsTwo-state room regulators flush mountedEU-297 v2

WIRELESS TWO-STATE ROOM REGULATOR (flush mounted)

Product description

Wireless Two-State Room Regulator

* temporary illumination of the display

Functions Performed by the Controller:

Wireless communication
Control of the room temperature
Day/night program
Manual program
2-wire connection
non-voltage No/Com/Nc relay (max. 1A/230V/AC)
Additional control based on floor temperature (if wired NTC floor sensor is used)

Controller’s Equipment:

Temporary illumination of the display
Built-in room sensor
Power adapter (signal receiver) with No/Com/Nc relay (max. 1A/230V/AC)
Batteries 2x AAA 1,5V

Heating / Cooling mode:

This function allows you to control devices used for heating, such as cooling devices or air conditioners. In order to configure the operation, select the function in the menu that you want the regulator to perform (heating or cooling).

czujnik-temp-pod_ico_web FLOOR TEMPERATURE sensor:

When using an additional floor temperature sensor, the room regulator will control the room temperature taking into account the floor temperature (set the minimum and maximum floor temperature). Among other things, we can prevent the floor from cooling down in well-sunny rooms.

Expansion of the

The primary controllers

Wired controller for thermostatic actuators (8 sections)

EU-L-5s

WIRED CONTROLLER FOR THERMOSTATIC ACTUATORS (10 SECTIONS)

EU-L-10